Roofer installing hexagonal-pattern roof shingles, working along the roof edge
Residential / Roofing

Roof Repairs & Flat Roofing in Scarborough

Roof repairs and flat roofing done right, from a single storm-damaged section to a complete pitched roof replacement.

The job, in full

What's included

Pitched roof replacement in slate, natural tile and concrete tile

Flat roof replacement using modern GRP and EPDM systems

Storm damage and emergency repair call-outs

Leadwork, guttering and fascia renewal alongside re-roofing

Why us

Roofing is a trade with a lot of quick, cash-in-hand quotes and very few with real accountability if something leaks eighteen months later. We roof as part of a wider building firm, with the same insurance and warranty backing as our joinery and renovation work.

Roof repairs in Scarborough: what we fix

Most calls start with a stain on a ceiling. The cause is usually one of a short list: slipped or cracked slates and tiles, failed lead around a chimney or in a valley, a blocked or broken gutter, or wind damage after a storm.

We look at the roof properly before pricing it, then repair the fault itself instead of patching the symptom. Where water is coming in now, we make the roof watertight first and come back to finish the repair.

Flat roofing in GRP fibreglass and EPDM rubber

We lay new and replacement flat roofs in two systems. GRP is a fibreglass laminate built up on new roof boards and finished with a topcoat, so the surface has no joints. EPDM is a rubber membrane, often laid as a single sheet across the whole roof.

Both suit extensions, dormers, garages and bay roofs. Which one is right depends on the shape of the roof, the number of upstands and rooflights, and whether anyone needs to walk on it.

Roof replacement and re-roofing

A full re-roof is more than new tiles. The old covering comes off, the timbers are checked and repaired, and new underlay and battens go on before the slate or tile. Insulation is upgraded while the roof is open.

We re-roof in slate, natural tile and concrete tile, with leadwork, guttering, fascias and soffits renewed at the same time where they need it. A part-stripped roof is weatherproofed at the end of every day.

Building regulations for roof work

Small repairs do not need building regulations approval. Re-covering does once it affects more than half the roof, or more than a quarter of the building's whole external envelope. At that point the insulation normally has to be brought up to current standards as part of the work.

Approval is also needed if the new covering is at least 15 per cent heavier than the old one, for example concrete tile replacing slate, because the roof structure has to be checked for the extra load. We tell you at the survey which side of those lines your roof falls.

Roofers who are also builders

A leaking roof rarely stops at the roof. Wet timbers, a stained ceiling or blown plaster underneath are jobs for joiners and plasterers, and ours are on the same team. The roofing on our own extensions and loft conversions is done the same way, by the people building the rest of it.

Common questions

Straight answers on roofing.

A slate or tile pitched roof replacement typically takes 5 to 9 working days, weather dependent. A flat roof replacement is quicker, usually 2 to 4 days. We factor realistic weather contingency into every schedule rather than promising a fixed date we can't guarantee.

Get in touch

Ready to talk through your roofing project?

Get in touch and we'll arrange a site visit to scope the work properly before quoting.

5.0 · 8 Google reviews